S3-Proxy has Security Issues in its Resource Path Matching Implementation

Background

The original concern is functional: a resource pattern should treat a percent-encoded segment like some%2Fvalue as a single opaque token rather than splitting it into two path segments at the decoded /. Investigation into why %2F was being decoded and how routes matched against the result surfaced three related security issues, documented below.

Rather than landing a fix directly, the problem space warrants discussion first. Different fixes carry different compliance and compatibility tradeoffs, and every viable option is a breaking change in some form. Aligning on a direction before committing to an implementation is the safer path.

Root cause: two different path representations

Go's net/http decodes percent-encoded characters when it parses an incoming URL: %2F becomes / in r.URL.Path, while the original encoded form is preserved in r.URL.RawPath. Two different parts of s3-proxy use different fields:

• The auth middleware calls r.URL.RequestURI(), which returns the encoded form (from RawPath when available). It sees %2F as literal characters, not as path separators.
• The bucket handler reads r.URL.Path to build the S3 key. It sees the decoded form, where %2F has already become /.

All three issues stem from this mismatch, combined with how glob patterns are compiled. The examples below use PUT for concreteness, but the auth bypass applies to any HTTP method — a config that restricts GET or DELETE on a namespace is equally affected, meaning an attacker could read from or delete objects in a protected namespace without credentials.

A note on RFC 3986

RFC 3986 §2.2 states that / and %2F are not equivalent in a URI path:

URIs that differ in the replacement of a reserved character with its corresponding percent-encoded octet are not equivalent.

/ is a reserved gen-delim used as a path segment separator. %2F is its percent-encoded form and, by the RFC, should be treated as data within a segment — not as a separator. So:

• /foo/bar/baz → three segments: foo, bar, baz
• /foo%2Fbar/baz → two segments: foo/bar (opaque data), baz

The original functional concern (wanting foo%2Fbar to match as a single token against a single-segment wildcard) is therefore RFC-correct behaviour. Go's r.URL.Path violates this by decoding %2F to /, collapsing the two representations into one. This is the underlying tension that makes fixing these issues non-trivial: the simplest security fix makes s3-proxy more RFC non-compliant, while the RFC-correct fix requires a more significant refactor.

A note on breaking changes

Any of the proposed fixes for these issues should be treated as a breaking change. Each option alters how path patterns in existing configs are interpreted — whether by changing how * matches segments, by shifting which path representation auth matches against, or by normalising paths before they reach the router. Operators upgrading to a fixed version will need to review their resource path definitions, and a clear migration note in the changelog is essential regardless of which approach is chosen.

One way to avoid a hard breaking change would be to introduce a new field — for example route: — that carries the fixed semantics, while keeping the existing path: field with its current behaviour (and marking it deprecated). Operators could migrate resource definitions incrementally, and the security fix would be available immediately without requiring a coordinated config update across all deployments. The obvious cost of this approach is maintaining two parallel implementations, duplicated test coverage, and the ongoing burden of supporting a deprecated code path until it can eventually be removed.

---

Issue 1 — * in resource paths matches across /

Background

Resource paths are matched using github.com/gobwas/glob. The call site is:

// pkg/s3-proxy/authx/authentication/main.go
g, err := glob.Compile(res.Path)

glob.Compile is called without a separator argument. Without a separator, * matches any character — including /. This means a pattern intended to protect a single path segment actually matches across directory boundaries.

Example

Consider a config with an open route and a protected route:

resources:
  # open — no auth required
  - path: /upload/*/drafts/
    methods: [PUT]
    whiteList: true

  # protected — basic auth required
  - path: /upload/*/restricted/
    methods: [PUT]
    basic:
      ...

The intent is clear: drafts is open, restricted is protected. The * is meant to match a single path segment (the object identifier).

However, because * crosses /, the pattern /upload/*/drafts/ also matches:

PUT /upload/foo/drafts/../restricted/

The path segment matched by * is foo, and then drafts/../restricted/ is consumed by the rest of the pattern — because without a separator, * is equivalent to .* and matches /, ., and everything else.

The result: an unauthenticated request is accepted by the open route.

Fix discussion

The straightforward fix is to pass '/' as the separator to glob.Compile:

// before
g, err := glob.Compile(res.Path)

// after
g, err := glob.Compile(res.Path, '/')

With a separator set:

• * matches any sequence of non-/ characters (a single path segment).
• ** matches any sequence including / (crossing path boundaries).

This fix closes the Issue 1 attack above: with a separator, drafts/../restricted/ is more than one segment and no longer matches the pattern /upload/*/drafts/.

Breaking change

Any existing config that relies on * crossing / must be updated to **. For example:

# before — worked accidentally because * crossed /
- path: /upload/*/drafts/

# after — single-segment match (behaviour unchanged for single-segment IDs)
- path: /upload/*/drafts/

# after — multi-segment match (e.g. nested object IDs containing /)
- path: /upload/**/drafts/

A migration note in the changelog would be needed.

---

Issue 2 — Percent-encoded slashes bypass auth via segment collapsing

Background

With Fix 1 applied, * only matches a single path segment. However, the auth middleware matches against r.URL.RequestURI() — the encoded path — while the bucket handler uses r.URL.Path — the decoded path. A client can use %2F to make what looks like a single segment in the encoded URI decode into multiple segments including a protected path component.

Example

Using the same config as Issue 1:

PUT /upload/foo%2Frestricted/drafts/

Step by step:

1. r.URL.RawPath = /upload/foo%2Frestricted/drafts/
2. r.URL.Path (decoded) = /upload/foo/restricted/drafts/
3. Auth middleware calls r.URL.RequestURI() → returns the encoded form.
4. With Fix 1's separator /, glob splits on the literal /. The segment between the first and second slash is foo%2Frestricted — one token with no literal / — so * matches it. Pattern /upload/*/drafts/ fires.
5. Open route → request proceeds without auth.
6. Bucket handler uses r.URL.Path → S3 key is upload/foo/restricted/drafts/… — written into the restricted namespace without credentials.

Proof via integration test

I added TestPercentEncodedSlashBypass to pkg/s3-proxy/server/server_integration_test.go. The test sends a complete multipart PUT without credentials and asserts a 401 response. It currently fails with 204 — the file is written in full to the restricted namespace without any authentication.

Fix discussion

This issue has two fundamentally different classes of fix, each with a different stance on RFC 3986 compliance.

Option A — Match auth against the decoded path (r.URL.Path)

Change the auth middleware to use r.URL.Path instead of r.URL.RequestURI():

// before
requestURI := r.URL.RequestURI()

// after
requestURI := r.URL.Path

Both auth and the bucket handler now operate on the same decoded string, closing the mismatch that enables the bypass.

Pros: One-line change; no other code touched; closes the bypass completely.

Cons: RFC 3986 non-compliant — /foo%2Fbar/baz and /foo/bar/baz become indistinguishable at the auth layer. A pattern like /upload/*/drafts/ will match both PUT /upload/foo/drafts/ and PUT /upload/foo%2F.../drafts/ identically after decoding, making it impossible for operators to write a pattern that distinguishes the two. Any path segment containing a literal / encoded as %2F can never be matched as a single token by *.

Option B — Use the raw path in both auth and key construction

Keep r.URL.RequestURI() in the auth middleware (reverting the Option A change) and replace the bucket handler's decoded path extraction with r.URL.EscapedPath() stripped of the mount path prefix. The AWS SDK then handles percent-encoding the key in the HTTP request to S3, with no manual segment splitting required.

This keeps %2F opaque at both layers: auth matches against the encoded form, and the S3 key preserves the encoded characters verbatim.

Security mechanism: the bypass attack (PUT /upload/foo%2Frestricted/drafts/) still returns 204 — the open route genuinely matches, because foo%2Frestricted is one encoded segment and * accepts it. However, the key written to S3 is upload/foo%2Frestricted/drafts/… — a distinct namespace from upload/foo/restricted/drafts/…. The attacker cannot reach the protected prefix because %2F and / are treated as different characters all the way to storage.

AWS S3 compatibility confirmed: S3 natively supports %2F in key names. A key upload/foo%2Fbar/file.txt is stored and retrieved as a distinct object from upload/foo/bar/file.txt. All four operations (HEAD, GET, PUT, DELETE) work correctly with %2F-containing paths.

Pros: RFC-compliant; %2F remains a meaningful encoding — foo%2Fbar is one token and * correctly matches it as a single segment; /foo%2Fbar/baz and /foo/bar/baz are distinct at both auth and storage layers; simpler than it sounds — no custom segment-splitting utility needed, just r.URL.EscapedPath() in the handler. The breaking change is contained to config files, not clients: the only clients that break are those relying on * crossing literal / — and those require a config change to ** under any fix option. Clients that encode user input containing / as %2F in a path segment are preserved: foo%2Fbar is still one encoded segment, and * still matches it. Under Option A those same clients break — the decoded form splits into multiple segments that no longer match *. The required client-side fix would be to filter or transform any / out of user input before building the URL, which may not always be feasible if the / carries meaning.

Cons: The auth middleware reverts to using the encoded path, which re-opens the door to dot-segment bypass (Issue 3) if the path-cleaning middleware is not also in place — the two fixes must be applied together.

A note on the 204 response: a request like PUT /upload/foo%2Frestricted/drafts/ returns 204 under this option, which may look like a bypass at first glance. It is not. If %2F carries meaning, foo%2Frestricted is a valid identifier indistinguishable from any other — the server has no basis to treat it as suspicious. The correct security responsibility is to handle all inputs consistently and safely, not to guess intent based on the content of user-provided values. The namespace separation guarantee satisfies that: whatever the client sends is handled the same way at both the auth and storage layers.

Option C — Reject requests containing %2F in the path

Return 400 Bad Request for any request whose raw path contains %2F:

if strings.Contains(r.URL.RawPath, "%2F") || strings.Contains(r.URL.RawPath, "%2f") {
    http.Error(w, "Bad Request", http.StatusBadRequest)
    return
}

Pros: Simplest possible enforcement; eliminates the ambiguity entirely.

Cons: Breaks any client that sends object names containing / encoded as %2F; rules out a legitimate and RFC-sanctioned use of percent-encoding.

---

Issue 3 — Dot-dot segments bypass authentication with prefix patterns

Background

Issues 1 and 2 both involve * (single-segment wildcard). A different class of bypass survives Fix 1 and Fix 2 when configs use prefix-style patterns with ** at the end, such as /open/**. This is a natural and common pattern for "allow everything under this prefix." The ** token is explicitly designed to cross /, so .. traversal within that prefix still reaches protected paths.

Note that %2F..%2F encoded traversal is a variant of this issue: the decoded form (/../) contains dot segments that ** can consume, as described in the root cause section.

Example

Consider this config:

resources:
  # protected — basic auth required for anything under /restricted/
  - path: /restricted/**
    methods: [PUT]
    basic:
      ...

  # open — no auth required for anything under /open/
  - path: /open/**
    methods: [PUT]
    whiteList: true

Without any path normalization, the following request bypasses auth:

PUT /open/../restricted/secret.json

Step by step:

1. Go's net/url resolves dot segments when parsing the request URI: r.URL.Path is /restricted/secret.json. The raw form ../ is preserved only in r.URL.RawPath.
2. The auth middleware calls r.URL.RequestURI(), which returns the encoded form — /open/../restricted/secret.json — and evaluates resources against that.
3. /restricted/** does not match because the raw path does not start with /restricted/.
4. /open/** matches: ** is allowed to cross /, so it consumes ../restricted/secret.json.
5. The open route fires — no auth required — the request returns 204.
6. The bucket handler reads r.URL.Path — already /restricted/secret.json — and writes the file directly into the restricted namespace.

Confirmed against AWS S3: the file lands at restricted/secret.json — not at a key containing ../. Go resolves the dot segments before the bucket handler runs, so the write goes straight into the protected prefix. This makes the attack more severe than a key-naming anomaly: it is a direct, confirmed write into the restricted namespace with no authentication.

Proof via integration test

I added TestPathTraversalDoubleStarPrefix to pkg/s3-proxy/server/server_integration_test.go. It uses the exact config above and shows that, with a path-cleaning middleware applied before the auth middleware, the traversal returns 401 instead of 204:

{
    // /open/** still matches /open/../restricted/file because ** crosses '/'.
    // cleanPathMiddleware resolves the path to /restricted/file first, which
    // matches the protected resource -> 401.
    // Without cleanPathMiddleware this would return 204 (auth bypassed).
    name:         "traversal from open to restricted via ** prefix pattern is blocked",
    inputMethod:  "PUT",
    inputURL:     "http://localhost/open/../restricted/file.txt",
    expectedCode: 401,
},

Note on %2E (percent-encoded dots)

Go's net/http decodes %2E → . in r.URL.Path before any middleware runs, so %2E%2E arrives as .. by the time any of the options below apply. All options operate on the already-decoded r.URL.Path and therefore handle encoded dots without any extra work.

Fix discussion

All options below address the same root problem: r.URL.RequestURI() preserves dot segments while r.URL.Path has already resolved them, and auth sees the un-resolved form. The options differ in where the resolution happens and how invasive the change is.

Option A — Reject requests containing dot segments

Reject (400 Bad Request) any request whose decoded path contains /./ or /../:

func rejectDotSegmentsMiddleware(next http.Handler) http.Handler {
    return http.HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
        p := r.URL.Path
        if strings.Contains(p, "/./") || strings.Contains(p, "/../") ||
            strings.HasSuffix(p, "/.") || strings.HasSuffix(p, "/..") {
            http.Error(w, "Bad Request", http.StatusBadRequest)
            return
        }
        next.ServeHTTP(w, r)
    })
}

Pros: Simple, explicit, no normalization side-effects.
Cons: Rejects requests that some clients may legitimately send (though dot segments in HTTP paths are unusual and ill-advised).

Option B — Use path.Clean

func cleanPathMiddleware(next http.Handler) http.Handler {
    return http.HandlerFunc(func(w http.ResponseWriter, r *http.Request) {
        p := r.URL.Path
        cleaned := path.Clean(p)
        if cleaned != p {
            r2 := r.Clone(r.Context())
            r2.URL.Path = cleaned
            r2.URL.RawPath = ""
            next.ServeHTTP(w, r2)
            return
        }
        next.ServeHTTP(w, r)
    })
}

path.Clean resolves .. and ., collapses double slashes, and also removes the trailing slash. The trailing-slash removal is a breaking change for any config that uses paths ending in / — resource patterns, mount paths, or anything else matched against the incoming path. A request to /upload/foo/drafts/ would be cleaned to /upload/foo/drafts, and any pattern or handler that expects the trailing slash would no longer match.

This can be mitigated by restoring the trailing slash after cleaning:

if len(p) > 1 && p[len(p)-1] == '/' {
    cleaned += "/"
}

Implementation note: An approach that stores the cleaned path in the request context rather than modifying r.URL.Path and clearing r.URL.RawPath will not work: both the auth middleware and the bucket handler read from r.URL directly, so a context-stored override is invisible to them.

Pros: Uses the standard library; less custom code.
Cons: The trailing-slash removal is mitigable by restoring the trailing slash after cleaning (as shown above), but it adds a correctness requirement to the middleware that is easy to overlook — omitting it silently breaks any config using trailing-slash patterns, which is the default convention in s3-proxy examples and documentation.

---

Interaction between Issue 2 and Issue 3 fixes

The choice made for Issue 2 affects the tradeoffs for Issue 3:

• If Option A is chosen for Issue 2 (auth uses r.URL.Path), then dot segments have already been resolved by Go before any middleware runs, so Issue 3 is partially addressed without any additional middleware — but Option A's RFC non-compliance tradeoff still applies.
• If Option B is chosen for Issue 2 (raw path in both layers), the auth middleware sees the encoded form, which still contains literal ../ dot segments. Issue 3 is not addressed by Option B alone — one of the Issue 3 options must also be applied. Importantly, whichever dot-segment option is chosen must clear r.URL.RawPath when it modifies the path, so that r.URL.EscapedPath() in the bucket handler reflects the cleaned path. This works naturally with both Issue 3 options (which operate on r.URL.Path and clear RawPath), and the fixes compose cleanly in practice.
• In all cases, an explicit dot-segment policy (reject or resolve) is clearer than relying on Go's implicit resolution as a side-effect.

---

Combined effect

Attack	Issue 1 fix	Issue 2 fix	Issue 3 fix
* crosses / (/upload/*/drafts/ matches ../restricted/)	Fixed	—	—
%2F segment injection (foo%2Frestricted/drafts/ bypasses */restricted/)	No	Fixed	—
.. traversal via ** prefix pattern (/open/../restricted/)	No	No	Fixed
%2F..%2F encoded traversal (decoded .. consumed by **)	No	Fixed*	Fixed

* Issue 2's fix (auth using decoded path, O